AS568-271 FFKM O-Ring — 234.54 × 3.53 mm
A robust, high-squeeze section for demanding static and reciprocating seals in larger equipment. With an inside diameter of 234.54 mm and a 3.53 mm cross section, this is a large-bore seal for large-bore machinery and process equipment. Moulded from Aperflu 2275 perfluoroelastomer (FFKM) for continuous service up to 200 °C, this seal resists hot acids, caustics, solvents, fuels and steam.
Dimensions
| Dash number | AS568-271 |
|---|---|
| Inside diameter (ID) | 234.54 mm (9.234 in) |
| Cross section (CS) | 3.53 mm (0.139 in) |
| Outside diameter (OD) | 241.6 mm (9.512 in) |
| Material | Aperflu 2275 perfluoroelastomer (FFKM) |
| Service temperature | up to 200 °C continuous |
Chemical and petrochemical processing
Pumps, valves, reactors and dosing systems handling hot acids, caustics, ketones, esters and mixed process streams. Unlike FKM, this perfluoroelastomer resists swelling and degradation across a broad chemical spectrum, keeping sealing force over long service intervals.
Why Aperflu 2275 FFKM
Compared with bisphenol-cured FKM, peroxide-cured FFKM keeps its sealing force longer at temperature — critical for static and slow-dynamic duty in chemical service.
Typical applications
Hydraulic cylinders, chemical process valves, wellhead and downhole tooling, where Aperflu 2275 outperforms FKM and EPDM in aggressive media and elevated temperature.
Compound properties
| Property | Typical value | Test method |
|---|---|---|
| Hardness | 70 – 71 Shore A | GB/T 39693.4 |
| Tensile strength | 21.2 – 21.8 MPa | GB/T 528 (dumbbell type 2) |
| Elongation at break | 155 – 170 % | GB/T 528 (dumbbell type 2) |
| Compression set, 200 °C × 70 h (25 %, method B) | 15 – 16 % | GB/T 7759.1 |
All values are typical. Every batch is shipped with an individual certificate of analysis and may differ from the typical values listed here.
Chemical resistance
| Media group | Rating |
|---|---|
| Hot organic & inorganic acids | Excellent |
| Caustics (NaOH up to 50 %) | Excellent |
| Ketones, aldehydes, esters, ethers, alcohols | Excellent |
| Solvents, fuels, hydrocarbons, sour gases | Excellent |
| Steam and hot water | Excellent |
| Amines (high temperature, concentrated) | Good – contact us for grade selection |
| Clean-in-place (CIP) / steam-in-place (SIP) agents | Excellent |
| Active pharmaceutical ingredients (APIs) | Excellent |
Need AS568-271 in a custom colour or quantity?
Tell us your dash number, quantity and service media. We quote within 24 hours.
Request a Quote