AS568-102 FFKM O-Ring — 1.24 × 2.62 mm
A balanced industrial section for static face, radial and slow rotary seals across a wide diameter range. With an inside diameter of 1.24 mm and a 2.62 mm cross section, this is a small-bore seal for compact assemblies and small-bore equipment. Moulded from Aperflu 2275 perfluoroelastomer (FFKM) for continuous service up to 200 °C, this seal resists hot acids, caustics, solvents, fuels and steam.
Dimensions
| Dash number | AS568-102 |
|---|---|
| Inside diameter (ID) | 1.24 mm (0.049 in) |
| Cross section (CS) | 2.62 mm (0.103 in) |
| Outside diameter (OD) | 6.48 mm (0.255 in) |
| Material | Aperflu 2275 perfluoroelastomer (FFKM) |
| Service temperature | up to 200 °C continuous |
Metallurgy and steelmaking
Furnaces, casting lines, hydraulic systems and gas-supply equipment in hot, aggressive environments. Aperflu 2275 holds sealing force against heat, coolants and process gases where ordinary elastomers harden and crack.
Why Aperflu 2275 FFKM
The compound is moulded, de-flashed and inspected to a burr-free finish, and every batch ships with its own certificate of analysis for traceability.
Typical applications
General machinery, pumps, compressors, gearboxes and process connections, where Aperflu 2275 outperforms FKM and EPDM in aggressive media and elevated temperature.
Compound properties
| Property | Typical value | Test method |
|---|---|---|
| Hardness | 70 – 71 Shore A | GB/T 39693.4 |
| Tensile strength | 21.2 – 21.8 MPa | GB/T 528 (dumbbell type 2) |
| Elongation at break | 155 – 170 % | GB/T 528 (dumbbell type 2) |
| Compression set, 200 °C × 70 h (25 %, method B) | 15 – 16 % | GB/T 7759.1 |
All values are typical. Every batch is shipped with an individual certificate of analysis and may differ from the typical values listed here.
Chemical resistance
| Media group | Rating |
|---|---|
| Hot organic & inorganic acids | Excellent |
| Caustics (NaOH up to 50 %) | Excellent |
| Ketones, aldehydes, esters, ethers, alcohols | Excellent |
| Solvents, fuels, hydrocarbons, sour gases | Excellent |
| Steam and hot water | Excellent |
| Amines (high temperature, concentrated) | Good – contact us for grade selection |
| Clean-in-place (CIP) / steam-in-place (SIP) agents | Excellent |
| Active pharmaceutical ingredients (APIs) | Excellent |
Need AS568-102 in a custom colour or quantity?
Tell us your dash number, quantity and service media. We quote within 24 hours.
Request a Quote